Inora 8-12 kg Fish Boxes

Fish boxes

Inora 8-12 kg Fish Boxes

With Inora's fish boxes, you can easily pack fish and ensure it stays fresh and high-quality throughout the entire transport chain, right to the customer.

Inora 8, 10, and 12 kg fish boxes are available with smooth and sectioned bottoms, both with and without plugs. The boxes stack efficiently and securely on pallets.

Our selection also includes suitable plugs, lids, ice protection films, and film dividers for the boxes.

Inora fish boxes meet the requirements for food packaging.

We manufacture fish boxes using either traditional EPS or new Luonto or Kierto materials.

All of our products intended for fish packaging are food-tested, highly insulating, and recyclable.

In the fish boxes made from Luonto material, traditional fossil oil has been replaced with 100% bio-oil. The CO2 emissions of this raw material are significantly lower than those of traditional plastic grades, by as much as 85%. The plant mass of the bio-oil used in the raw material comes from European contract farms. Luonto products are also 100% recyclable in standard plastic recycling.

Kierto products are made from a material that has already had a previous life as plastic products. The used plastic products have been chemically recycled back into a raw material without adding any virgin material. The material is therefore 100% recycled and 100% recyclable. Our Kierto packaging is the world's first food box made from recycled material.

Inora FL 8 kalalaatikko
  • External dimensions: 600 x 400 x 130 mm

  • Water volume of sectioned bottom: 2.7 L

  • The box structure allows for secure stacking and cross-stacking.

  • A 10 mm tongued lid and a smooth board lid are available for the boxes.

  • See the comparison table for all product dimensions, volumes, and packaging sizes.

Product numbers:

Inora FL8 sectioned bottom 320216

Inora Luonto FL8 sectioned bottom 330012

Inora Kierto FL8 sectioned bottom 340012

Inora FL 8 kalalaatikko
  • External dimensions: 600 x 400 x 130 mm

  • Water volume of sectioned bottom: 2.7 L

  • A box with a drainage hole, for which the Inora plug is suitable.

  • The water can be drained neatly and in a controlled manner by slightly opening the plug, so the dripping water does not wet the side of the box and the plug doesn't get lost.

  • The box structure allows for secure stacking and cross-stacking.

  • A 10 mm tongued lid and a smooth board lid are available for the boxes.

  • See the comparison table for all product dimensions, volumes, and packaging sizes.

Product numbers:

Inora FLT 8 kg sectioned bottom 320217

Inora Luonto FLT 8 kg sectioned bottom 330013

Inora Kierto FLT 8 kg sectioned bottom 340013

Inora LL 10 kg sileä pohja kalalaatikko
  • External dimensions: 600 x 400 x 150 mm

  • Smooth inner base.

  • The box structure allows for secure stacking and cross-stacking.

  • A 10 mm tongued lid and a smooth board lid are available for the boxes.

  • See the comparison table for all product dimensions, volumes, and packaging sizes.

Product numbers:

Inora LL 10 kg smooth bottom 320100

Inora Luonto LL 10 kg smooth bottom 330008

Inora Kierto LL 10 kg smooth bottom 340008

Inora LLL 10 kg lokeropohja kalalaatikko
  • External dimensions: 600 x 400 x 150 mm

  • Water volume of sectioned bottom: 2.6 L

  • The box structure allows for secure stacking and cross-stacking.

  • A 10 mm tongued lid and a smooth board lid are available for the boxes.

  • See the comparison table for all product dimensions, volumes, and packaging sizes.

Product numbers:

Inora LLL 10 kg sectioned bottom 320099

Inora Luonto LLL 10 kg sectioned bottom 330007

Inora Kierto LLL 10 kg sectioned bottom 340007

Inora LKL 10 kalalaatikko
  • External dimensions: 600 x 400 x 135 mm

  • Smooth inner bottom.

  • The box structure allows for secure stacking and cross-stacking.

  • A 10 mm tongued lid and a smooth board lid are available for the boxes.

  • See the comparison table for all product dimensions, volumes, and packaging sizes.

Product numbers:

Inora LKL 10 kg smooth bottom 320103

Inora Luonto LKL 10 kg smooth bottom 330009

Inora Kierto LKL 10 kg smooth bottom 340009

Inora LKL 10 kalalaatikko
  • External dimensions: 600 x 400 x 135 mm

  • Smooth inner bottom, perforated.

  • The box structure allows for secure stacking and cross-stacking.

  • A 10 mm tongued lid and a smooth board lid are available for the boxes.

  • See the comparison table for all product dimensions, volumes, and packaging sizes.

Product numbers:

Inora LKL 10 kg smooth bottom perforated 320104

Inora Luonto LKL 10 kg smooth bottom perforated 330010

Inora Kierto LKL 10 kg smooth bottom perforated 340010

Inora FL 10 kalalaatikko
  • External dimensions: 600 x 400 x 160 mm

  • Water volume of sectioned bottom: 2.7 L

  • The box structure allows for secure stacking and cross-stacking.

  • A 10 mm tongued lid and a smooth board lid are available for the boxes.

  • See the comparison table for all product dimensions, volumes, and packaging sizes.

Product numbers:

Inora FL10 sectioned bottom 320220

Inora Luonto FL10 sectioned bottom 330006

Inora Kierto FL10 sectioned bottom 340006

Inora FL 10 kalalaatikko
  • External dimensions: 600 x 400 x 160 mm

  • Water volume of sectioned bottom: 2.7 L

  • A box with a drainage hole, for which the Inora plug is suitable.

  • The water can be drained neatly and in a controlled manner by slightly opening the plug, so the dripping water does not wet the side of the box and the plug doesn't get lost.

  • The box structure allows for secure stacking and cross-stacking.

  • A 10 mm tongued lid and a smooth board lid are available for the boxes.

  • See the comparison table for all product dimensions, volumes, and packaging sizes.

Product numbers:

Inora FLT 10 kg sectioned bottom plug 320221

Inora Luonto FLT 10 kg sectioned bottom plug 330017

Inora FS 10 ja FS 12 kalalaatikko
  • External dimensions: 600 x 400 x 130 mm

  • Smooth inner bottom.

  • The box structure allows for secure stacking and cross-stacking.

  • A 10 mm tongued lid and a smooth board lid are available for the boxes.

  • See the comparison table for all product dimensions, volumes, and packaging sizes.

Product numbers:

Inora FS 10 kg smooth bottom 320218

Inora Luonto FS 10 kg smooth bottom 330015

Inora Kierto FS 10 kg smooth bottom 340015

Inora FS 10 ja FS 12 kalalaatikko
  • External dimensions: 600 x 400 x 130 mm

  • Smooth inner bottom.

  • A box with a drainage hole, for which the Inora solid plug is suitable.

  • The box structure allows for secure stacking and cross-stacking.

  • A 10 mm tongued lid and a smooth board lid are available for the boxes.

  • See the comparison table for all product dimensions, volumes, and packaging sizes.

Product numbers:

Inora FST 10 kg smooth bottom plug 320219

Inora Luonto FST 10 kg smooth bottom plug 330016

Inora FS 10 ja FS 12 kalalaatikko
  • External dimensions: 600 x 400 x 160 mm

  • Smooth inner bottom.

  • The box structure allows for secure stacking and cross-stacking.

  • A 10 mm tongued lid and a smooth board lid are available for the boxes.

  • See the comparison table for all product dimensions, volumes, and packaging sizes.

Product numbers:

Inora FS 12 kg smooth bottom 320225

Inora Luonto FS 12 kg smooth bottom 330025

Inora Kierto FS 12 kg smooth bottom 340025

Inora FS 10 ja FS 12 kalalaatikko
  • External dimensions: 600 x 400 x 160 mm

  • Smooth inner bottom.

  • A box with a drainage hole, for which the Inora solid plug is suitable.

  • The box structure allows for secure stacking and cross-stacking.

  • A 10 mm tongued lid and a smooth board lid are available for the boxes.

  • See the comparison table for all product dimensions, volumes, and packaging sizes.

Product numbers:

Inora FST 12 kg smooth bottom plug 320227

Inora Luonto FST 12 kg smooth bottom plug 330027

Inora Kierto FST 12 kg smooth bottom plug 340027

Product External dimensions length / width / height (cm) Internal dimensions length / width / height (cm) Water volume (l) pcs/sack
Inora FL8 sectioned bottom 60 / 40 / 13 55,5 / 35,5 /  8,8 2,7 44
Inora FLT8 sectioned bottom 60 / 40 / 13 55,5 / 35,5 / 8,5 2,7 44
Inora LL10 smooth bottom 60 / 40 / 15 55 / 36 /  13   36
Inora LLL10 sectioned bottom 60 / 40 / 15 55,5 / 36 /  10 2,6  36
Inora LKL10 smooth bottom 60 / 40 / 13,5 56 / 36 / 13   44
Inora LKL10 smooth bottom, perforated 60 / 40 / 13,5 55,5 / 36 / 10   44
Inora FL10 sectioned bottom 60 / 40 / 16 55,5 / 35,5 / 11,5 2,7 36
Inora FLT10 sectioned bottom, plug 60 / 40 / 16 55,5 / 35,5 / 11,5 2,7  36
Inora FS10 smooth bottom 60 / 40 / 13 55,5 / 35,5 / 11   44
Inora FST10 smooth bottom, plug 60 / 40 / 13 55,5 / 35,5 / 11   44
Inora FS12 smooth bottom 60 / 40 / 16 55,5 / 35,5 / 14   36
Inora FST12 smooth bottom, plug 60 / 40 / 16 55,5 / 35,5 /14   36