Inora Insulation
Inora Grafit Roof Insulation is designed for low-slope roofs in new and renovation projects that require good thermal insulation and compressive strength.
The half-tongue-and-groove Inora Roof Insulation boards on all sides are easy and quick to install tightly on the roof. A ventilation groove collector runs around the perimeter of the board, so the boards do not need to be aligned with each other during installation.
Inora Roof Insulation is manufactured with or without ventilation grooves. The geometry of the ventilation grooves in Inora Roof Insulation prevents the chimney effect that can occur in cross-grooved insulation.
With Inora Roof Wedges, the main and counter-slopes of the roof are implemented precisely, quickly, and without waste.
-
Insulates well against heat and cold.
-
Insulation thickness does not affect insulation capacity or load-bearing capacity.
-
Insulation performance does not degrade during its lifespan.
-
Insulation capacity improves as the temperature drops.
-
Resistant to load and compression.
-
Has good long-term load-bearing capacity, so it is also suitable for heavily loaded structures.
-
Highly moisture-resistant, does not conduct water capillarily, and is an excellent frost insulation.
-
Dampens the effects of mechanical stress, such as vibration and impacts.
-
Does not mold or rot.
-
Resistant to organic chemicals.
-
Easy to work with and handle.
-
Can be cut with a fine-toothed saw, knife, or hot wire.
Inora Grafit 80S Roof+
-
For the insulation of low-slope roofs in new and renovation projects
-
Half-tongue-and-groove on all sides, 20 mm
-
Ventilation groove collector around the perimeter of the board
-
With or without ventilation grooves
-
Suitable for e.g., steel deck roofs and TT-slab roofs.
-
Also available with Inora roof slope wedges and Inora roof fasteners.
-
Fire protected
-
Material: Inora Grafit 80S
-
Board size: 1000 x 1200 mm (effective size 1080 x 1180 mm)
-
Thickness: 100 - 250 mm
-
Thermal conductivity: 0.031 W/mK
-
Compressive strength: 80 kPa (EN13163)
-
Bending strength: 130 kPa (EN13163)
-
Fire class: E
Used for both main and counter slopes.
Material: Inora EPS 60S or Inora EPS 100S
The pieces are dimensionally accurate, which makes installation smooth and fast.
Waste is minimized both on site and in Inora's manufacturing.
Clear package markings, so lifting to the roof can be done in the correct order.
Good long-term load-bearing capacity, so the wedges retain their shape and don't crumble.
Board size for main slopes: 1,200 x 2,000 mm or 1,500 x 2,000 mm
Feel free to ask our sales staff for more information about Inora Roof Insulation.
Download the Declaration of Performance (DoP) and Environmental Product Declarations (EPD) here.